Connection
Browser requirement: Chrome / Edge (desktop) or Android Chrome. iOS Safari does not support Web Bluetooth.
Before use, hold the device button for 3 seconds to enter configuration mode (LED blinks at 1 Hz).
Not connected
BTHome AES Key (16 bytes / 32 hex characters)
--
This key is used for Home Assistant connection authentication.
Report Interval
sec
Set the periodic report interval (10-600 seconds). Persists after power off.
Radar Parameters (Common Settings)
Raw AT Command
For a single AT command, click "Enter Config Mode" first if the radar is not already in configuration mode. "Read Current Parameters" and "Set Current Parameters" handle this automatically.
Firmware Upgrade (OTA)
Select a .bin firmware file then click "Start Upgrade". Do not disconnect or close the page during the upgrade. The device will reboot automatically after completion.